2.4GHz wireless networking
IEEE 802.11b/g/n compatible
Supports up to WPA2-Personal Wi-Fi network
Bluetooth 4.2/BLE wireless technology
2.4GHz wireless networking
IEEE 802.11b/g/n compatible
Supports up to WPA2-Personal Wi-Fi network
Bluetooth 4.2/BLE wireless technology
InvisConnectTM patented technology with InvisDeco support
Dual 15Amps controllable receptacles
Single reset button for pairing and reset
Single status indicator
Standard outlet electrical box
Neutral wire required
InvisConnectTM patented technology with InvisOutlet
Controllable and dimmable 3500K nightlight
Dual touch pads for outlet control
Dual outlet status indicators
Single RGB status indicator
Active sensorsAIR: Temperature, humidity, air quality level (AQI), CO2, VOC, and pressure monitoring
Active sensorsMOTION: Motion and presence detection
Active sensorsLIGHT: Ambient light monitoring (LUX)
Active sensorsPRO: AIR, MOTION, and LIGHT active sensors.
Connects with InvisOutlet
Line voltage: 100-125V AC
Frequency: 60Hz, single phase
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
UL498, UL1310/UL62368
FCC, IC certifications
UL514D
FCC, IC certifications
Matter standard
MQTT with SSL/TLS technology for remote access
MQTT local pairing with Home Assistant
WebSocket support with dedicated web interface
Device commissioning and pairing setup
Dual receptacles control
Customize device configurations
Set up automation routines
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Device provisioning and pairing setup
Dual receptacles control
Customize device configurations
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Integrates with Matter Interoperability
Works with Apple Home
Works with Amazon Alexa
Works with Google Assistant
Works with any assistant platforms supporting MQTT configuration (HomeAssistant)
Actively monitors ambient room status
Reports current AQI status on status indicator
Trigger automation routines based on sensor feedbacks
2.4GHz wireless networking
IEEE 802.11b/g/n compatible
Supports up to WPA2-Personal Wi-Fi network
Bluetooth 4.2/BLE wireless technology
InvisConnectTM patented technology with InvisDeco support
Dual 15Amps controllable receptacles
Single reset button for pairing and reset
Single status indicator
Standard outlet electrical box
Neutral wire required
Line voltage: 100-125V AC
Frequency: 60Hz, single phase
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
ETL62368
FCC, IC certifications
Matter standard
MQTT with SSL/TLS technology for remote access
MQTT local pairing with Home Assistant
WebSocket support with dedicated web interface
Device commissioning and pairing setup
Dual receptacles control
Customize device configurations
Set up automation routines
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Device provisioning and pairing setup
Dual receptacles control
Customize device configurations
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Matter
Works with Apple Home
Works with Amazon Alexa
Works with Google Assistant
Works with any assistant platforms supporting MQTT configuration
Thread/Zigbee wireless networking
IEEE 802.15.4
Bluetooth 5.0/BLE wireless technology
InvisConnectTM patented technology with InvisOutlet
Controllable and dimmable 3500K nightlight
Dual touch pads for outlet control
Dual outlet status indicators
Single RGB status indicator
Active sensorsAIR: Temperature, humidity, air quality level (AQI), CO2, VOC, and pressure monitoring
Active sensorsMOTION: Motion and presence detection
Active sensorsLIGHT: Ambient light monitoring (LUX)
Active sensorsPRO: AIR, MOTION, and LIGHT active sensors.
Connects with InvisOutlet
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
ETL60730
FCC, IC certifications
Actively monitors ambient room status
Reports current AQI status on status indicator
Trigger automation routines based on sensor feedbacks
Bulk purchase discounts are now available. MSRP $129, now $85.
*shipping will begin in April 2024
© 2023 All rights reserved.
San Jose, CA
